PLASTI-KOTE CO INC -- 187 EPOXY PAINT -- 8010-00F022140
=====================  Product Identification  =====================

Product ID:187 EPOXY PAINT
MSDS Date:01/31/1990
FSC:8010
NIIN:00F022140
=== Responsible Party ===
Company Name:PLASTI-KOTE CO INC
Address:1000 LAKEROAD
City:MEDINA
State:OH
ZIP:44256
Info Phone Num:(216) 725-4511
Emergency Phone Num:(216) 725-4511
CAGE:07778
=== Contractor Identification ===
Company Name:PLASTI-KOTE CO INC
Address:1000 LAKE ROAD
City:MEDINA
State:OH
ZIP:44256
Phone:(216) 725-4511
CAGE:07778
Company Name:TEMPO PRODUCTS CO A PLASTI-KOTE CO INC
Address:1000 LAKE ROAD
Box:City:MEDINA
State:OH
ZIP:44256
Country:US
Phone:330-725-4511
CAGE:07708

=============  Composition/Information on Ingredients  =============

Ingred Name:ISOBUTANE, 2-METHYLPROPANE
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 27%
Other REC Limits:1000 PPM
OSHA PEL:1800 MG/CUM
ACGIH TLV:1000 PPM

Ingred Name:NON-HAZARDOUS FOR INGREDIENTS
Fraction by Wt: 15-20%

Ingred Name:WEIGHT PER GALLON IN POUNDS: 7-8
RTECS #:9999999WG

Ingred Name:ACETONE; DIMETHYL KETONE
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 25-30%
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:XYLENE, DIMETHYLBENZENE, XYLOL
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 25-30%
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NASAL/RESPIRATORY
    IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE,
    UNCONSCIOUSNESS, ASPHYXIATION & PERMANENT BRAIN/NERVOUS SYSTEM
    DAMAGE. EYE: IRRITATION/REDNESS/TEARING/BLURRED  VISION. INGESTION:
    GASTROINTESTINAL IRRITATION/NAUSEA/VOMITING/DIARRHEA. SKIN:
    IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: NASAL/RESPIRATORY IRRITATION,
    DIZZNESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE, UNCONSCIOUSNESS,
    ASPHYXIAT & PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE. EYE:
    IRRITATION/REDNESS/TEARING/BLURRED VIS ION. INGESTION:
    GASTROINTESTINAL IRRITATION/NAUSEA/VOMITING/DIARRHEA. SKIN:
    IRRITATION.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT,
    GIVE OXYGEN. ADMINISTER ARTIFICIAL RESPIRATION IF NOT BREATHING.
    EYES: FLUSH W/WATER FOR 15 MINUTES KEEP EYELIDS OPEN. INGESTION:
    DON'T INDU CE VOMITING (ASPIRATION OF MATERIAL INTO LUNGS CAN CAUSE
    CHEMICAL PNEUMONITIS WHICH CAN BE FATAL) KEEP PERSON WARM. SKIN:
    WASH W/SOAP & WATER OR HANDCLEANER. OBTAIN MEDICAL ATTENTION IN ALL
    CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:0F
Lower Limits:1%
Extinguishing Media:ALCOHOL, FOAM, CO2 & DRY CHEMICAL
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. USE FOG
    NOZZLES. WEAR SCBA. COOL CLOSED CONTAINERS TO PREVENT PRESSURE
    BUILD-UP/AUTOIGNITION/EXPLOSION WHEN EXPOSED TO HEAT.
Unusual Fire/Explosion Hazard:VAPORS ARE >AIR & MAY TRAVEL ALONG THE
    GROUND OR MAY BE MOVED BY VENTILATION TO IGNITION SOURCE & IGNITE
    AT LOCATIONS DISTANT FROM HANDLING POINT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. VENTILATE
    AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSORBENT, OR
    OTHER ABSORBENT MATERIAL & TRANSFER TO A CLOSED CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE IN AREA >120F, DIRECT SUN
    LIGHT, HEAT OR OPEN FLAMES. DON'T PUNTURE OR INCINERATE. AVOID
    CONTACT & BREATHING VAPORS.
Other Precautions:STORE LARGE QUANTITIES IN BUILDINGS PROTECTED FOR
    STORAGE OF NEPA IC FLAMMABLE LIQIDS. INTENTIONAL MISUSE
    DELIBERATELY CONCENTRATING & INHALING CONTENTS MAY BE HARMFUL OR
    FATAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH/MSHA RESPIRATORY PROTECTION OR
    EQUIVALENT OR LEAVE THE AREA.
Ventilation:SUFFICIENT MECHANICAL (GENERAL) &/OR LOCAL EXHAUST TO
    MAINTAIN EXPOSURE AIR
Spec Gravity:(H20 = 1) <1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT,
Percent Volatiles by Volume:85-90%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT/SPARKS/OPEN FLAME/SMOKING/ELECTRIC
    MOTORS/DIRECT SUNLIGHT/TEMPS >120F OR OTHER SOURCES OF INGNITION.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CO2, CO,
    VARIOUS HYDROCARBONS & NITROGEN COMPOUNDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAYBE
    DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE
    W/LOCAL, STATE & FEDERAL REGULATIONS. DON'T PUNCTURE OR INCINERATE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.