ADVANCE PROCESS SUPPLY -- LUMINESCENT PIGMENT, PP-30  -- 8010-00N021180
<pre>=====================  Product Identification  =====================

Product ID:LUMINESCENT PIGMENT, PP-30
MSDS Date:09/23/1988
FSC:8010
NIIN:00N021180
=== Responsible Party ===
Company Name:ADVANCE PROCESS SUPPLY
Address:400 NORTH NOBLE
City:CHICAGO
State:IL
ZIP:60622-6383
Country:US
Info Phone Num:312-829-1400
Emergency Phone Num:312-942-8577
CAGE:29431
=== Contractor Identification ===
Company Name:ADVANCE PROCESS SUPPLY CO.
Address:400 NORTH NOBLE STREET
Box:City:CHICAGO
State:IL
ZIP:60622-6383
Country:US
Phone:312-942-8504
CAGE:29431

=============  Composition/Information on Ingredients  =============

Ingred Name:ZINC OXIDE
CAS:1314-13-2
RTECS #:ZH4810000
Fraction by Wt: 1.5%
OSHA PEL:15MG/M3 TDUST/5 FUME
ACGIH TLV:10MG/M3 TDUST; 9293

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION OF DUST MAY IRRITATE THE
    RESPIRATORY PASSAGES. DUST MAY IRRITATE EYES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EYE AND RESPIRATORY TRACT IRRITATION.
Medical Cond Aggravated by Exposure:NO DATA AVAILABLE.

=======================  First Aid Measures  =======================

First Aid:INHAL: CONSULT MD IF IRRITATION OF RESPIRATORY PASSAGES
    OCCURS. EYE: FLUSH W/WATER FOR A MINIMUM OF 15 MINUTES. SKIN: WASH
    WITH SOAP & WATER. INGEST: CONSULT MD.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:CO2, WATER SPRAY, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:COLLECT INTO SUITABLE CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN ORIGINAL CONTAINER. STORE IN
    DRY AREA.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED DUST MASK RECOMMENDED.
Ventilation:LOCAL EXHAUST.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLOTHING SUITABLE TO AVOID SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:4.03
Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS YELLOW-GREEN CRYSTALLINE POWDER.
Percent Volatiles by Volume:NONE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ACIDS WHICH CAUSE GENERATION OF HIHGLY TOXIC
    HYDROGEN SULFIDE GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:SOX AND ZINC.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF OR INCINERATE IN ACCORDANCE WITH
    FEDERAL, STATE, AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.