EVANS ADHESIVE CORP -- 01016 HIDE-N-HANG ACRYLIC PRIMER  -- 8010-00N072113
<pre>=====================  Product Identification  =====================

Product ID:01016 HIDE-N-HANG ACRYLIC PRIMER
MSDS Date:11/14/1989
FSC:8010
NIIN:00N072113
=== Responsible Party ===
Company Name:EVANS ADHESIVE CORP
Address:925 OLD HENDERSON RD
City:COLUMBUS
State:OH
ZIP:43220-2733
Country:US
Info Phone Num:614-451-2665
Emergency Phone Num:614-451-2665
CAGE:13124
=== Contractor Identification ===
Company Name:EVANS ADHESIVE CORP
Address:925 OLD HENDERSON RD
Box:City:COLUMBUS
State:OH
ZIP:43220-3722
Country:US
Phone:614-451-2665
CAGE:13124

=============  Composition/Information on Ingredients  =============

Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 10%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:NON-HAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:HAZARDS ARE BELIEVED TO BE MINIMAL.
    SMALL INGESTED AMOUNTS ARE NOT BELIEVED TO PRODUCE ADVERSE HEALTH
    EFFECTS. PROLONGED OR REPEATED CONTACT WITH LIQUID ADHESIVE ON THE
    SKIN MAY CAUSE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
    SUPPORT BREATHING (GIVE O*2/ARTF RESP) . SKIN:WASH W/SOAP & WATER.
    EYES:FLUSH W/WATER FOR AT LEAST 15 MINUTES & CONSULT MD.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Extinguishing Media:WATER OF CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . WHEN POLYMER BURNS, WATER, CARBON & CARBON MONOXIDE ARE
    PRODUCED.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT. USE WATER TO COOL CONTAINERS EXPOSED TO
    FIRE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DAM UP TO LIMIT SPREADING. MOP UP OR ABSORB ON
    INERT MATERIAL & PLACE IN CONTAINERS. FLUSH AREA W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PROTECT FROM FREEZING. KEEP CONTAINERS
    TIGHTLY CLOSED WHEN NOT IN USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN . NONE REQUIRED.
Ventilation:PROVIDE ADEQUATE VENTILATION FOR PROPER AIR CIRCULATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:NORMAL CLEANLINESS SHOULD BE OBSERVED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:17.535
Vapor Density:0.9822
Spec Gravity:1.24 (H*2O=1)
pH:6.5-8
Evaporation Rate &amp; Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:DISPERSIBLE
Appearance and Odor:WHITE LIQUID; MILD ACRYLIC ODOR.
Percent Volatiles by Volume:53

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:PRODUCT STABILITY MAY BE AFFECTED BY
    FREEZING OR SUBJECTING PRODUCT TO TEMPERATURES ABOVE 120F.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE OR DISPOSE OF IN LANDFILL ACCORDING
    TO FEDERAL, STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.